Estimate your 2023 H&S 3243 payment

Description

The heavy-duty series of H&S manure spreaders feature a massive unitized welded frame with heavy floor supports, side stakes, and wrap-around steel front corners. Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5″ U-channel side members. Compare with any on the market. The side flares on all H&S heavy-duty manure spreaders are made of 10-gauge g210 culvert grade galvanized steel. Sides, front panel and both sides of the rear hydraulic end gate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze-up. The solid virgin grade poly floor allows for considerably less torque to move a heavy load. The two-speed apron drive is standard equipment. The 29″ diameter beater has two styles of replaceable beater paddles. Half of the 14-beater paddles are blunt for widespread, and the other half are a sharp ripper-type for cutting and shredding. Beater side wiper blades are also standard equipment. The hydraulic end gate features 2 cylinders with hydraulic lines running through a 3″ x 3″ tube under the floor for protection. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points. Special cast steel alloy apron idler slides are used instead of idler sprockets, making for years of dependable service. Adjustment for the main apron is easily made by simply loosening the two side bolts and drawing up the long bolt. The beater drive gear box is 1:1.