Estimate your 2023 Lane Shark LS-3 payment

Description

2023 LaneShark LS-3 Standard Motor Features may include: The Lane Shark LS-3 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance. Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions. The Lane Shark LS-3 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately. The Lane Shark LS-3 weighs just under 320 lbs. In order for the Lane Shark LS-3 brush cutter to operate to full potential, the tractor must have a hydraulic flow rate of at least 5 GPM. To run the Lane Shark, you must have rear remotes or third function. ONLY pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS). When purchasing the Lane Shark LS-3 brush cutter, you will receive a unit equipped with #8 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 3/8” is required. Some tractors may require a high capacity motor. If your tractor meets the specifications for an LS-3, but has a hydraulic flow rate above 8.5gpm, you will need a high capacity LS-3 LS-3 OVERVIEW The LS3, like the LS2, has the same multi-position cutting capabilities, but is manufactured specifically for smaller tractors. The LS3